在整個製造過程中確保理想的環境對產品質量和產出效率至關重要。當製造環境不受控製時，通常會導致產品尺寸變化，從而妨礙其功能。濕度不足會導致脆性

部件和收縮或翹曲的零件，當部件形狀或尺寸不再適合規劃、成型或裝配的適當尺寸時，由於公差過小，可能會導致一係列問題。

葉片（複合材料）製造環境中的靜電問題發生在幹燥空氣導致表麵充滿靜電時。這會導致各種問題，包括粉塵火災和靜電爆炸。在某些情況下，靜電還會影響油漆和飾麵與複合材料的粘附方式。

Inadequate humidity escalates the development of dust and the intensity of dust swirl in indoor spaces. Maintaining an adequate humidity level throughout your production facility ensures that the dust in the air is enclosed in a film of water. The dust particles absorb the humidity in the air and fall to the

地麵，在正常清潔過程中可以輕鬆移除。

Suppress dust during sanding operations by maintaining a consistent humidity level of 40-60% RH throughout your facility. A correct humidification level lowers the risk of dust explosions for dust from combustible materials. Adequate humidity cleans the air of dust faster, reducing the risk of fine dusts in the air, which can cause potential problems to your employees if inhaled and can undermine the production of your products. Proper air humidification also offers odor neutralisation, an important added benefit of air humidification in waste processing, but also for many chemical manufacturing processes.

油漆和塗層應用需要特定的環境標準，並必威电子有嚴格的溫度和相對濕度要求。對於需要受控靜電電荷的塗層，需要適當的濕度才能有效地抑塵和有效粘附。

通過確保在整個過程中保持70%相對濕度的理想環境

設施，您將能夠在油漆和塗層應用中更好地保​​持一致的質量。這些條件是適當的靜電塗料和粉末塗料應用和塗料展位環境控製的關鍵。如果沒有適當的控製，塗層粘附和耐久性受損，削弱了您的產品。

Electrostatic discharge (ESD) occurs with the sudden flow of electricity between two electrically charged objects coming into contact with one another. When objects holding different charges come into contact, or when the dielectric between them breaks down, a visible spark can be triggered, which can damage electronics and pose safety concerns for facility operations.

Maintaining a consistent humidity level between 40-50% RH lowers surface resistance on manufacturing equipment and

products, as well as on communal areas including floors, carpets, table mats and other susceptible areas. When humidity levels drop below 40% RH, this protection disappears and routine employee activities lead to objects being charged with static electricity, posing a safety risk of serious shock for employees and increasing the possibility of damage to or defects within electronic components and devices.

Evaporative or adiabatic cooling is a process that introduces liquid water directly into the air without the need for adding thermal energy (heat) to the water. As the water evaporates, it draws heat from the air to drive the phase change from liquid to vapor. Evaporative or adiabatic humidification systems installed directly in a ventilation airstream result in both increased humidity and cooling of the air. Reducing mechanical cooling requirements offers significant energy savings for manufacturing facilities.

絕熱加濕解決方案使設施能夠體驗可靠且一致的濕度水平和空氣質量條件，同時也提供了一個機會，以大大減少冷卻所需的能源消耗。實施evaporative cooling humidification solution允許設施以最佳效率運行，降低能量使用和運營成本。